Cabinet Doors 'N' More now offers 48" W x 96" H 3D Laminate Thermofoil Veneer Sheets with a non-adhesive phenolic back. This is a great option for cabinet refacing and can be used on cabinet face frames and end panels. This is same type of thermofoil material we use for our cabinet doors and drawers and is available in four finishes: White, High Gloss White, Antique White, Stone Grey and Smoke Grey. They will match perfectly!
The non-adhesive phenolic backing provides a barrier between the thermofoil and the glue. We recommend contact cement to be used for product application. 3D Laminate is for inside use only and do not recommend use for outside applications.
Phenolic Backer Thickness: .55mm (1/32 + or -)
Thermofoil Thickness: 1/16 to 1/32 depending on the color
Most colors are offered at $189.00 per sheet. High Gloss White offered at $219.00 per sheet.Tools & Materials needed to install laminates:
Critical: Laminates should be placed flat and allowed to acclimate for 48 hours before installation.
Surface Prep: Fill in any voids on the surfaces with wood putty. Lightly sand any surfaces you plan to cover. Clean the area and wait for the it to thoroughly dry. Do not use a power sander. Use a tack cloth to remove excess dust.
Cutting: Use a veneer/laminate slitter, rotary cutter, or sharpened utility knife/straight edge to cut the laminate. Cut the laminate strips ½” wider and 2” longer than the area you plan to cover (stiles/rails). We recommend doing the stiles first and then the rails. Apply the laminate strips to one opening at a time.
Adhering: We recommend contact cement to be used for product application.
Finishing: Use a razor knife to remove the excess material and finish with a hand file or 150 grit sand block to trim the excess material.
Be the first to ask a question about this.