Lancaster Veneer Slab Custom Cabinet Door

Lancaster Veneer Slab Custom Cabinet Door

The Lancaster unfinished kitchen cabinet or bath vanity replacement cabinet door offers the ultimate contemporary and modern look for those who seek sleek, minimal simplicity. This slab style unfinished cabinet door features a 1/4" veneer plywood panel over a medium density fiberboard (MDF) core with matching edge banding on all 4 sides. All of our replacement cabinet doors are custom made to your specifications so that your Do-It-Yourself (DIY) kitchen or bath remodeling project turns out as you envisioned. Make sure you measure correctly and visit our "How to measure cabinet doors" page to find out more information. Matching cabinet Drawer Fronts are available.

Notes:

  • 3/4" Thickness
  • Medium Density Fiberboard (MDF) Core with 1/4" plywood veneer overlay
  • Vertical Grain Pattern
  • Matching edge-band on all 4 sides
  • Manufactured in the USA
  • Width: Minimum 5 1/2" - Maximum 48"
  • Height: Minimum: 6" - Maximum: 83"
  • Doors with a height of 42" or less will receive two hinge bores
  • Doors with a height of 42 1/16"-72" will receive three hinge bores
  • Doors with a height of 72 1/16" or larger will receive four hinge bores
  • All hinge bore holes are drilled for any standard European concealed hinge

Edge Profile
Choose a Wood type to Get Started
Color
Hard Maple
Hard Maple
Cherry
Cherry
Enter Your Measurements

Please enter a width of at least 5 1/2 inches.
Please enter a width less than 48 inches.
&
Please enter a height of at least 6 inches.
Please enter a height less than 83 inches.
&
-+
base cost: $0.00

Customer Reviews

Based on 2 reviews Write a review

QUESTIONS & ANSWERS

Ask a Question
  • To confirm the hinge boring, it looks like the charge is $2-is that for each door? or is it for each hole? One door i need is 48 1/2 tall needing three hinges and the the other door zi need is 28 1/8 requiring two hinges. Thanks


    You are correct...$2 for each cabinet door.

    One thing I want to bring to your attention...any cabinet door ordered over 26" wide or 48" high will be made with two panels unless specified by the customer. If you choose to have one panel just be aware this will void the warranty. If you would like one panel please put this in the notes section of your order.

    Thanks for reaching out

    CDNM Customer Support