Can you give me the measurements of the routed areas of the Naples cabinet door? I am trying to match to my current kitchen cabinets

The outside edge profile is 5/16. The rail/stile or flat area of the door is 1 11/16. The grooved inside edge profile is 1 1/2.


Thanks

CDNM Customer Support

Need 4 doors, 2 hinged left and 2 hinged right,how specify that on an order or will they be interchageable?

In this case, the Naples door is "square" so the hinge boring can be selected for left or right as the doors can be flipped to be used on either side of the cabinet.

Thanks

CDNM Customer Support

Are white Naples Thermofoil doors require further painting or are they completely finished?

The Naples thermofoil cabinet doors are completely finished and require no additional work.

CDNM Customer Support

Is there a return policy?

Yes.

When you place your order, Cabinet Doors 'N' More (CDNM) immediately gets to work, sending your specifications straight to our factories. We begin manufacturing your order virtually the instant it is received, preventing our woodworkers from making changes or modifications. This includes physical modifications, changes to order quantities, adding to orders or canceling an order already placed. 

Please verify all measurements, design choices and material selections before placing your order. Each item we manufacture, including our cabinet doors and cabinet drawer fronts, is built to your precise specifications using the measurements you provide. Due to the custom nature of our products, we are unable to offer exchanges, accept returns or provide refunds for products produced following your instructions. 

If you would like to add products after submitting an order, start a new one and we'll produce it at the same rapid rate. With our free shipping, you won't pay any transport expenses regardless of how many orders you submit. 

We only need to buy 2 RTF doors. Do you accept small orders like this?

Absolutely!!

We accept any size orders...from 1 piece to 50+ pieces.

CDNM Customer Support

What does 2 1/8 framing stiles and rails mean?

The outer part of the cabinet door are referred to as stiles and rails...All cabinet doors have 2 stiles and 2 rails. The stiles refer to the vertical part of the cabinet door and the rails make up the horizontal part. Rail and stile width can vary depending on the cabinet door style. 2 1/8" refers the width of the rail or stile.

We hope this helps

CDNM Customer Support

I have this door in in a home I bought 2 years ago. Was wondering if you can purchase just one door. 15 1/2 wide 21 7/8 high Thank You

Yes...you can purchase just one cabinet door or any of our producst from CDNM

We have no minimums and offer free shipping.

CDNM Customer Support

How long does it take to get doors once they are ordered? Naples RTF Raised Square, 9 doors (18 7/16 x 29 7/16)?

All orders ship in approx. 20 business days. We now offer the option of faster shipping in 10-15 business days for a small surcharge.

Thanks

CDNM Customer Support

Are doors paintable? I need to match the rest of the cabinet with probably acrylic paint.

Yes, our wood Cabinet Doors are paintable. We recommend that you order Paint Grade Hard Maple or MDF (Medium Density Fiberboard) for any of the cabinet door styles. Both of these cabinet doors offer your the greatest chance for success when wanting to paint cabinet doors. The proper prep work is the key to the success of this project. There are many considerations: cabinets are made out of a variety of materials, offered in a wide range of finishes, from oil-based paints, stains and laminates. You can tackle this project but you'll need the right tools, the right primer, quality paint, and some patience to do the project right and remodel your kitchen without going over budget. White RTF Cabinet Doors are much harder to paint...it can be done but we do not recommend it as you might not be happy with the results.   Thanks

CDNM Customer Support

is there a does it matter what side the boring is done it looks like you could just flip if over for LH or RH hinges

You are correct for this particular cabinet door...if you want to order a square panel replacement Cabinet Doors (slab, recess or raised) you can use LH or RH boring. If you want to to order an arched or cathedral replacement raised panel cabinet door you do have to determine LH or RH for boring.
CDNM Customer Support

Are your Naples RTF white raised panel doors one solid piece, or 5 piece like the other style Naples raised panel wood doors? Thanks in advance for any advice. Pleasant Garden, NC

Yes, The Naples RTF raised panel Cabinet Doors are one solid piece...For all of our White RTF cabinet doors we use a piece of MDF (Medium Density Fiberboard) that is machine-routed to the raised panel design and then finished with a vacuum-formed, seamless rigid thermo-foil (RTF).  Rigid Thermofoil Cabinet Doors are high quality because they feature seamless construction, a smooth finish, and have color consistency throughout as well as being very easy to maintain and clean. 
CDNM Customer Support 

Is it possible to get a small sample of the exterior white on the to verify color match . We need a bunch of cabinets but only if we can match the White RTF Raised Square Cabinet Door to our other cabinets in large kitchen located on Marco Island Florida. Thank You

Yes...We can send you a color swatch of the of the actual White RTF that we use for all of White RTF Cabinet Doors and Drawer Fronts.  If you can supply your name and address we can send that out to you.

CDNM Customer Support

NAPLES RTF RAISED SQUARE CABINET DOOR: This door design matches exactly Looking for a refrigerator cabinet measuring 36W X 12H X 24D do you have? Can I get a color swatch my current cabinets are not bright white maybe eggshell white Thank you Sam Edelman 770 880-3971 Atlanta GA

We're sorry...we do not manufacture actual kitchen cabinets. We just manufacture and supply replacement Cabinet Doors, Drawer Fronts, Drawer Boxes and accessories including mouldings, veneers, end panels and cabinet shelving.
Thanks

CDNM Customer Support